Printing A Funds (Postage) Report - Pitney Bowes DM125 Operator's Manual

6 • Adding Postage/Connecting to Data Centre

Printing a Funds (Postage) Report

(only accessible at the mailing machine)
A funds report allows you to print a record of how much postage has
been used and how much is remaining in the machine.
1. Press Funds.
2. Press Page Down to the third screen.
◄Check PBP balance
◄Print Funds Report
3. Select Print Funds Report.
4. At the insert envelope or tape sheet prompt, insert an envelope
or tape sheet into the machine. The machine prints the funds
report (see sample below).
5. Press Clear (back arrow key) or Home to return to Home
screen.
Used:
Available:
Total Pieces: 40
Control Sum: $800 . 00
– the total of all postage ever used in the meter
Used
– the amount of postage left in the meter
Available
Total Pieces
meter that had postage applied
Control Sum
the amount Used plus Available. This is a postal requirement that
verifies an accurate accounting of the postage in your machine.
Batch Count
plied since the last time the batch count was cleared
Batch Value
the batch value was cleared
No. – serial number of this meter (normally meter number)
PSD Serial
SV62667 Rev. A
$495 . 86
$304 . 14
– the total number of mail pieces run through the
– the total of all postage refills for the meter and equals
– the number of mail pieces that had postage ap-
– the amount of postage applied since the last time
34
Batch Count:
$493 . 16
Batch Value:
PSD Serial No.: 0011969
06 08 28
5 : 31P
6-13