Pitney Bowes DM125 Operator's Manual page 106

7 • System Options
Basic Options
Setting the Date, Time, and Timeouts
You can change the system date/time, set the date/time to day light
sav ings time, change the time at which your sys tem advances the
date/time to the next day, and set the amount of time your sys tem
can re main in ac tive be fore re vert ing to the nor mal preset val ues.
TIME & TIMEOUTS
◄Normal Preset
◄Sleep Mode
◄Autodate Advance
TIME & TIMEOUTS
◄Correct Drift
◄Daylight Saving
◄Postage Display
Setting the Time for Machine to Revert to Normal Preset
The normal preset is a set of values (postage, ad, ac count and so
on) that your machine display au to mat i cal ly returns to after a set pe-
riod of time. You can set the amount of time the display takes before
it re verts to the normal preset.
1. Press Options.
2. Press Page Down.
3. Select Time and Timeouts.
4. Select Normal Preset. The current setting is displayed.
5. Key in a new amount of minutes (from 1-240) be fore the system
re turns to the normal pre set and select OK. If you don't want to
change the current setting, just select OK. The display returns to
the Time and Timeouts menu.
6. Press Clear (back arrow key) to return to Options Menu.
7-8
Page
Up
Page
(lit key indicates
Down
more menu choices)
Page
Up
Page
Down
SV62667 Rev. A