Parts Of The Machine - Pitney Bowes DM125 Operator's Manual

Parts of the Machine

Item Part
1 Control Panel
2 Top Cover
3 Weighing
Platform
(optional)
4 LED
5 Stacker Tray
6 Utility Slot
7 Transport Re-
lease Lever
(two position
8 Feed Deck
9 Ink Waste Tank
(partially hidden
in figure)
10 Moistener
(optional)
SV62667 Rev. A
2 • Getting to Know Your System
Description
Allows you to enter and set up information on
your machine (see next page for details)
Opens up to allow replacement of the ink car-
tridge (see Chapter 10, Maintenance)
Allows you to weigh a mail piece (your system
can then calculate postage based on the service
selected)
Lights green when your system is on; lights am-
ber when your system is in "sleep" mode
Allows the neat stacking of finished mail pieces
Allows you store the Quick Reference Guide,
tape strips, etc. for easy access.
Home - transport rollers engaged for processing
mail (normal)
Released - trans port rollers disengaged so you
can clear a stalled mail piece
The machine won't process mail
i NOTE:
when the lever is left in the released position.
Supports your envelope, post card or tape sheet
as it passes un der the printer mechanism
Collects ink waste. Can slide out for mainte-
nance.
Applies sealing fluid to the envelope flap (you
can seal envelopes or leave them unsealed,
depending on how you feed them)
2-3