Pitney Bowes DM125 Operator's Manual page 77

6 • Adding Postage/Connecting to Data Centre
Downloads from the Data Centre to Your Machine
Postal Code Update
If the Postal Code on record at the Pitney Bowes Data Centre does
not match the Postal Code of your system, the code will be down-
load ed into your system. (When a system is moved to a new Postal
Code, the Data Centre en ters the new code into the record. The sys-
tem is up dat ed when a con nec tion is made to the Data Centre.)
Postal Inspection
The CPC requires a postal inspection of your machine every 90
days. This postal inspection requirement can be automatically met
by connecting to the Pitney Bowes Data Centre to check your Post-
age By Phone
®
your mailing machine.
If the in ter val between inspections is more than 60 days,
NOTE:
i
your machine's dis play prompts Connection Due. If the interval
be tween inspections is more than 90 days, the dis play prompts
Connection Required By Post. At this point, you won't be able
to use your mailing system until your system is inspected (i.e.,
connected to the Data Centre). In either case, to sat is fy the postal
inspection requirement, simply:
• Follow the prompts on the Connection Due or Connection
Required By Post screens or
• Press Add Postage and select Check PBP Account Bal-
ance (which will not decrease or change the funds in your
account).
SV62667 Rev. A
meter payment account balance or to add postage to
6-3