Paper Pick Mechanism Assembly Removal - Lexmark X746de Service Manual

7526

Paper pick mechanism assembly removal

See
"Paper pick assembly" on page 7-5
Remove the paper tray.
1.
Remove the waste toner assembly. See
2.
3. Remove the rear frame cover. See
Disconnect the connector in JFDPCK1 (A) and JTRAY1 (B) on the system board.
4.
Open the latch (C) to remove the toroids from the cables.
5.
Push the cables through the hole in the frame below the two connectors.
6.
Service Manual
4-138
for the part number.
"Waste toner assembly
"Rear frame cover removal" on page
removal".
4-37.
Previous
Next
Go Back