5022-xxx
Paper pick mechanism assembly removal
See
"Paper pick mechanism assembly, C52x" on page 7-5
on page 7-5
for the part number.
1.
Remove the rear cover. See
2.
Disconnect the JTRAY1 (A) and JTRAY2 (B) connectors from the system card.
3.
Remove all toner cartridges.
4.
For models C52x only: If installed, remove the MPF swing arm assembly. See
(MPF) swing arm assembly removal—models C52x only" on page
4-68
Service Manual
"Rear cover removal" on page
or
"Paper pick mechanism assembly, C53x"
4-25.
"Multipurpose feeder
4-67.