Multipurpose feeder (MPF)/duplex motor assembly removal
See
"MP feeder/duplex motor" on page 7-7
Remove the low-voltage power supply (LVPS). See
1.
page
4-123.
2.
Remove the multipurpose feeder/duplex gear and housing. See
gear and housing removal" on page
Remove the two multipurpose feeder/duplex motor mounting screws (A).
3.
Remove the multipurpose/duplex motor from the printer.
4.
Push in the prongs (B) of the housing to remove the cable tie (C).
5.
for the part number.
"Low-voltage power supply (LVPS) removal" on
"Multipurpose feeder (MPF)/duplex
4-127.
7526
A
Repair information
4-129
Previous
Next
Go Back