Paper Pick Mechanism Assembly Removal - Lexmark C746n Service Manual

Paper pick mechanism assembly removal

See
"Paper pick assembly" on page 7-7
Remove the paper tray.
1.
Remove the waste toner assembly. See
2.
3. Remove the rear frame cover. See
Disconnect the connector in JFDPCK1 (A) and JTRAY1 (B) on the system board.
4.
Push the cables through the hole in the frame (C).
5.
Open the front access cover.
6.
for the part number.
"Waste toner assembly removal" on page
"Rear frame cover removal" on page
5026
4-184.
4-47.
Repair information
4-145
Previous
Next
Go Back