Lexmark X746de Service Manual page 337

Unlatch and rotate the pivots on the left and right side (M) until they are upright, then remove them.
11.
Note: If you are removing the top access cover to access another part, leave the top access cover and the
operator panel bezel attached, and you are done. If you are replacing the top access cover assembly FRU,
then remove the separate operator panel bezel FRU. See
page 4-40.
Remove the top access cover assembly.
12.
Installation note: When replacing the springs, slip the spring in place to hook onto the pivot (N), and push the
pivot back into place to secure the spring on the pivot
M
"Top access cover assembly removal" on
N
7526
Repair information
4-43
Previous
Next
Go Back