Paper Path / Dsd Detection Sensor Q30 - Ricoh CF5010 Service Manual

15 Jan 2013

3.2.9 PAPER PATH / DSD DETECTION SENSOR Q30

[A]
[B]
Removal
1. Remove nut [A] (
2. Disconnect Photo transistor connector [B] (
3. Remove Drive shaft assembly (
4. Disconnect LED connector [C] (
5. Loosen the LED nut [D] and slide off the connector (
Replacement
NOTE: Make sure to install the LED connector [C] correctly, so it will not interfere
with the Drive shaft assembly.
1. Reverse the removal procedure.
2. Enter Service mode (
3. Perform Cover Feeder DSD sensor calibration (
Manual).
[D]
x1).
3.2.7).
x1).
5.1.1 in BK5010e Service Manual).
CF-3-12
X03258 CF5010e Service manual
x1).
x1).
5.5 in BK5010e Service
[C]