Drive Components; Drive Motor; Drive Motor Base - Ricoh M379 Service Manual

Drive Components

• Disconnect the power cord from the inlet of the buffer pass unit and unplug the mainframe before
starting the following procedure.
• Do not pull out the buffer pass unit drawer until this unit has been docked to the mainframe. Otherwise,
the buffer pass unit can fall down.

Drive Motor

1. Rear cover ( p.11)
2. Controller board bracket (
3. Drive Motor [A] ( x 4,
• There are two drive motors (right and left) in the buffer pass unit. The both removal procedures are
identical.

Drive Motor Base

Removing the Drive Motor Base
1. Rear cover ( p.11)
2. Controller board bracket (
p.27)
x 1)
p.27 "Controller Board Bracket")
Drive Components
1
15