Cabinet Configuration; Table 3.1 Card Installation Configuration - Samsung OfficeServ 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
PART 3. INSTALLING AND REPLACING CARDS
This section describes how to install and replace various cards of the OfficeServ 7100
system.

3.1 CABINET CONFIGURATION

The OfficeServ 7100 system has 3 slots (slots 0 ~ 2). Slot 0 is a processor slot only
used for either the MP10 processor card. Slots1 and 2 are universal slots for station
and trunk interface cards as described below.
Front
Rear
Following cards are allowed to be installed in the 7100 as shown below:
Note: (ONLY THESE CARDS ARE ALLOWED IN THE SPECIFIED SLOTS. ALL
OTHER CARDS ARE NOT ALLOWED IN THE OS7100 SYSTEM)
Slot
Slot 0
(processor slot)
Slot 0
Slot 1
Figure 3.1 Front/Rear View of OfficeServ 7100 Cabinet

Table 3.1 Card installation Configuration

MP10 ONLY
3.1
Home Page
Slot 2
Cards Allowed
Table of Contents
INSTALLATION
PART 3 APRIL 2007