Checking The Lan Cable Connection; Configuring The Bonjour Settings; Setting Up The Computer; Setup Flow - Konica Minolta bizhub C754 User Manual

3

Checking the LAN cable connection

Check that a LAN cable is connected to the LAN port of this ma-
chine.

Configuring the Bonjour settings

Enable Bonjour. In addition, enter the name of this machine (Bonjour name) to be displayed as the name of
a connected device.
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
3.1.3

Setting up the computer

Setup flow

This section describes the setup flow for printing from your computer.
1
Preparing the printer driver
% Preparing the DVD-ROM

% Checking the operating systems supported by the printer driver

Check that your computer meets the operating environment requirements of the printer driver.
2
Installing the printer driver to the computer
% Installing the printer driver using the installer
Insert the DVD-ROM disk into the drive, and install the software by following the on-screen instructions.
% Adding the printer
Add the printer automatically detected by Bonjour to the computer.
3
Preparation finished

Checking the operating systems supported by the printer driver

The following lists the printer drivers included on the DVD-ROM supplied with this machine and the supported
operating systems.
Printer driver
PostScript PPD driver
(PS-PPD)
3-4
Preparation for Printing (Bonjour Connection)
Page descrip- Supported Operating Systems
tion language
PostScript 3 Em- Mac OS 9.2 or later
ulation Mac OS X 10.2.8/10.3/10.4/10.5/10.6
3.1
bizhub C754/C654