Changing Transmission Setting; Setting Subject; Cc Address Setting - Konica Minolta bizhub 266 User Manual

5
5.2

Changing transmission setting

The subject, CC address, file format, and compression coding method can be changed.
5.2.1

Setting subject

1
Press the Scan key.
% The machine switches to the scan mode.
2
Set the original and enter the destination address.
[OTHER SETTING=,] is displayed.
3
Press the , key.
The other setting screen appears.
4
Use the +/, key to select [SUBJECT], then press the OK key.
5
Enter the subject (title) of a mail to be transmitted, then press the OK key.
The screen returns to the other setting screen.
Tips
A maximum of 20 characters can be entered.
5.2.2

CC address setting

1
Press the Scan key.
% The machine switches to the scan mode.
2
Set the original and enter the destination address.
[OTHER SETTING=,] is displayed.
3
Press the , key.
The other setting screen appears.
4
From the other setting screen, use the +/, key to select [CC ADDRESS], then press the OK key.
5
Enter the E-mail address of the destination for CC'ing the message to, then press the OK key.
% To add other E-mail addresses, select [ADD], then press the OK key. Repeat the above procedure
until all concerned destinations are added.
% To check or correct the CC address entered, select [CHECK/EDIT], then press the OK key.
Tips
A maximum of 254 addresses can be entered in the CC box.
5-8
SUBJECT
Changing transmission setting
bizhub 306/266
5.2