Things You Must Do Before Using This Machine; Registering The Sending Record - Canon MF7280 - ImageCLASS B/W Laser Facsimile Manual

Things You Must Do Before Using This Machine

This section describes the important setting registrations and procedures that must
be done before the machine is used for sending operations.
According to recent amendments to the FCC (Federal Communications
Commission) rules governing the use of facsimile equipment in the United States,
the following sender information must be printed on every facsimile transmission:
Your fax number
•
Your personal name or company name
•
Time and date of transmission
•
IMPORTANT
• If you attempt to use the machine without registering the necessary information correctly,
the machine may not function properly.
•
Use phone lines with modular jacks measuring 9.7 feet (3 meters) or less to ensure
optimum connection and sending speeds.
■ Setting the Telephone Line Type
To set the type of telephone line connected to the machine, check whether it is a rotary
dial (rotary pulse) or a touch-tone type, and then make the correct setting. (See "Selecting
the Type of Telephone Line," on p. 1-10.)

■ Registering the Sending Record

The sending record is printed at the top of the every document you send to the recipient.
The registered information is printed, as shown below. Depending upon the model of the
machine at the receiving side, this information may appear on the display while
communication is taking place.
Date
12/09 2005 10:50
I-Fax Address
Sender's
or
Time Name (TTI)
Fax Number
FAX (404)XXX-XXXX CANON SALES

Things You Must Do Before Using This Machine

Page Number
Sender Information
0001/0001
1-9
1