Rx Report (For Service) - Canon SmartBase PC1200s Service Manual

CHAPTER 2 USING THE MACHINE

3.22.2.2 RX Report (for service)

A service error code list and an error dump list may be attached to the RX report in re-
sponse to an error reception. To attach, use SSSW-SW01 in service mode.
02/08/2001 19:33 FAX
*2
START TIME
*3
OTHER PARTY
*4
MAKER CODE
*5
MACHINE CODE
*6
Rx : (bit 1) 00000000 01100110 00011111 00100010 00000000 00000000 00000000 (bit56)
*7
Tx : (bit 1) 00000000 01110111 00010001 00100011 00000001 10101011 11000001(bit56)
*8
Rx :
Tx : NSF DIS
*1: Service error code.
*2: START TIME; date and time (in 24-hr notation).
*3: OTHER PARTY; telephone number sent from other party.
*4: MAKER CODE; manufacture code.
*5: MACHINE CODE; model code.
*6: Bits 1 through 48 of received DIS, DCS, or DTC.
*7: Bits 1 through 48 of received DIS, DCS, or DTC.
*8: RX: received procedure signal.
TX: transmitted procedure signal.
2-94
COPYRIGHT © 2001 CANON INC.
**************************
***
**************************
INCOMPLETE RECEPTION
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PGS.
RESULT
02/08 19:30
10001000
10011100 00000000
(bit57) 00000001 00000001 00000100 00000000 00000000
NSS TSI DCS PIX
CFR
2000 2000 2000 2000
***
RX REPORT
5001
02/08 19:30
03`02
1
*1
NG ##0793
F02-322-08
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
001
(bit96)