Host Topology Commands - IBM Midrange System DS4000 Series Hardware Manual

Host topology commands

Table 8-8 lists these commands.
Table 8-8 Host topology commands
Command
create host
create hostGroup
create hostPort
delete host
delete hostGroup
delete hostPort
set host
set hostGroup
set hostPort
show allHostPorts
FlashCopy commands
Table 8-9 lists these commands.
Table 8-9 FlashCopy commands
Command
create
FlashCopyLogicalDrive
recreate FlashCopy
set logicalDrive
stop flashcopy
Description
This command creates a new host.
This command creates a new host group.
This command creates a new host port.
This command deletes a host.
This command deletes a host group.
This command deletes a host port.
This command assigns a host to a host group or moves a host to a different
host group.
This command renames a host group.
This command changes the host type for a host port.
For all host ports connected to a storage subsystem, this command returns
the following information:
Host port identifier
Host port name
Host type
Description
This command creates a FlashCopy logical drive.
This command starts a fresh copy-on-write operation using an existing
FlashCopy logical drive.
This command defines the properties for a FlashCopy logical drive
and enables you to rename a FlashCopy logical drive.
This command stops a copy-on-write operation.
Chapter 8. Command-line interface and Script Editor
491