Using the Qlogic SANsurfer tools
When you click one of the host bus adapter ports in the HBA tree pane, the tab pane displays
eight tabs, as shown in Figure 7-81.
Figure 7-81 Qlogic SANsurfer FC HBA Manager view
The Qlogic SANsurfer has several tabs for the HBAs:
Information: Displays general information about the server and Host Bus Adapters, such
as worldwide name, BIOS, NVRAM, and driver version.
Device List: Displays the devices currently available to the host bus adapter.
Statistics: Displays a graph of the performance and errors on the host bus adapters over a
period of time.
Settings: Displays the current settings and allows you to make remote configuration
changes to the NVSRAM of the adapters. All changes require a reboot of the server.
Link Status: Displays link information for the devices attached to an adapter connected to
a host.
Target Persistent Binding: Allows you to bind a device to a specific LUN.
Utilities: Allows you to update the flash memory and NVSRAM remotely.
Diagnostics: Allows you to run diagnostic tests remotely.
446
IBM Midrange System Storage Hardware Guide