IBM Midrange System DS4000 Series Hardware Manual page 486

Figure 7-95 shows an example of this command.
[root@TC-2008 ~]# systool -c fc_host -v
Class = "fc_host"
Class Device = "host2" first fc adapter
Class Device path = "/sys/class/fc_host/host2"
fabric_name
issue_lip
node_name
port_id
port_name
port_state
port_type
speed
supported_classes
symbolic_name
system_hostname
tgtid_bind_type
uevent
[ content removed ]
Class Device = "host3" second fc adapter
Class Device path = "/sys/class/fc_host/host3"
fabric_name
issue_lip
node_name
port_id
port_name
port_state
port_type
speed
supported_classes
symbolic_name
system_hostname
tgtid_bind_type
uevent
[ content removed ]
Figure 7-95 HBA information in Linux: systool -c
Collecting information
In addition to the information mentioned in 7.7.6, "Collect All Support Data option" on
page 401, you can also send additional information about the Linux host server to your
service provider. This information can be collected by using the following commands:
SMdevices: Lists the DS5000 recognized by your server (if SMutil is installed).
rpm -qa: Lists installed software.
yum list installed: Lists installed software if yum is installed.
mppUtil -V: Lists the installed disk driver version.
ls -lR /proc/mpp: Lists the devices recognized by the RDAC driver.
cat /proc/scsi/scsi: Lists the LUNs recognized by the HBAs.
/opt/mpp/mppSupport: Script provided by RDAC to collect information. Generates a
compressed file in the /tmp folder.
468
IBM Midrange System Storage Hardware Guide
= "0x100500341e7096"
= <store method only>
= "0x200000e08b18208b"
= "0x070100"
= "0x210000e08b18208b"
= "Online"
= "NPort (fabric via point-to-point)"
= "2 Gbit"
= "Class 3"
= "QLA2340 FW:v3.03.26 DVR:v8.02.00.06.05.03-k"
= ""
= "wwpn (World Wide Port Name)"
= <store method only>
= "0x100500341e7096"
= <store method only>
= "0x200000e08b892cc0"
= "0x070500"
= "0x210000e08b892cc0"
= "Online"
= "NPort (fabric via point-to-point)"
= "2 Gbit"
= "Class 3"
= "QLA2340 FW:v3.03.26 DVR:v8.02.00.06.05.03-k"
= ""
= "wwpn (World Wide Port Name)"
= <store method only>