2. Click OK only if you are sure that all the drives making up the array are the ones that you
really want to import (and that they were already correctly exported and removed from the
source DS storage subsystem). The Import Array window is displayed, as shown in
Figure 7-45.
Figure 7-45 Import Array window
3. Click Finish if the configuration to import matches the exported configuration. If not, stop
and go back to the original DS storage subsystem.
4. If the controller detects any condition that will interfere with the current configuration, it lets
you know. If the condition detected is more critical,
source DS storage subsystem to solve the issue.
5. A confirmation window displays. Enter Yes and click OK.
384
IBM Midrange System Storage Hardware Guide
stop here
. It is better to go back to the