IBM Midrange System DS4000 Series Hardware Manual page 507

Logical drive commands
Table 8-7 lists these commands.
Table 8-7 Logical drive commands
Command
check logicalDrive
parity
clear logicalDrive
reservations
clear logicalDrives
unreadableSectors
create logicalDrive
driveCount=
(Automatic Drive
Select)
create logicalDrive
drives=
(Manual Drive Select)
create logicalDrive
array=
(Free Capacity Base
Select)
delete logicalDrive
recover logicalDrive
remove logicalDrive
lunMapping
repair logicalDrive
parity
set logicalDrive
Description
This command checks a logical drive for parity and media errors, and writes
the results of the check to a file.
This command clears persistent logical drive reservations.
This command clears unreadable sector information from one or more
logical drives.
This command creates an array across the storage subsystem physical
disks, and a new logical drive in the array. The storage subsystem
controllers choose the physical disks to be included in the logical drive.
This command creates a new array and logical drive, and enables you to
specify the physical disks for the logical drive.
This command creates a logical drive in the free space of an array.
This command deletes one or more standard logical drives or FlashCopy
and FlashCopy repository logical drives.
There can be potential storage subsystem configuration damage.
This command creates a RAID logical drive with the given properties
without initializing any of the user data areas on the disks.
This command removes the logical unit number mapping.
This command repairs the parity errors on a logical drive.
This command defines the properties for a logical drive.
Chapter 8. Command-line interface and Script Editor
489