Oil Pressure Adjustment Valve Replacement; Oil Pressure Adjustment Valve Disassembly - Husqvarna TC 449 2011 I.E. Workshop Manual

H01909
H01909
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

OIL PRESSURE ADJUSTMENT VALVE REPLACEMENT

Oil pressure adjustment valve disassembly

• Disassemble the following parts:
- screw (1)
- Seal (2)
- Spring (3)
- Adjuster piston (1)
Oil pressure adjustment valve assembly
• Grease adjuster piston and spring
Castrol GPS SAE 10W-40
• Assemble the following parts:
- Adjuster piston (4)
- Spring (3)
- Seal (2)
- Fit screw (1).
Oil adjustment valve screw plug onto crankcase
M14 x 1, with sealing ring Grease
thread
Consumables
Engine oil
Tightening torque figures
15 Nm / 1,5 Kgm / 11,06 ft/lb
F1.13
Workshop Manual Ed. 03-2012