Husqvarna TC 449 2011 I.E. Workshop Manual page 91

GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
H02518
2
H02444
H02519
H02520 H02520
- Working on the right side, loosen support clamp upper screw (1) using a 12
mm T-wrench.
- Working on the left side, loosen screw (2) using a 12 mm T-wrench.
- Release spring (3).
- Remove silencer (4).
E.23
Workshop Manual Ed. 03-2012