Preliminary Operations; Gear Selector Lock Disassembly; Gear Selector Lock Assembly - Husqvarna TC 449 2011 I.E. Workshop Manual

H02013
H02013
Workshop Manual Ed. 03-2012
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
STOP LEVER REPLACEMENT

Preliminary operations

Clutch cover disassembly
Removing clutch pressure plate
Removing clutch plates
Clutch hub disassembly
Clutch housing disassembly
Coolant pump cover disassembly
Coolant pump rotor disassembly
Engine right crankcase cover disassembly

Gear selector lock disassembly

• Disassemble the following parts:
- screw (1)
- Bushing (2)
- Stop element (3)
- Washer (4)
- Spring (5)

Gear selector lock assembly

• Assemble the following parts:
- Spring (5)
- Washer (4)
- Stop element (3)
- Bushing (2)
• Fit new screw (1).
Tightening torque figures
Stop lever on crankcase lower side
M6 x 16 Microincapsulated screw
replacement
F1.102
11 Nm