Fuel Pump Inspection - Husqvarna TC 449 2011 I.E. Workshop Manual

Workshop Manual Ed. 03-2012
FUEL INJECTION SYSTEM
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Fuel pump inspection

Remove the pump as described in Section "E".
- Connect the power supply unit positive pole (12V) to the red lead pin in the
pump connector;
Connect the power supply unit negative pole to the negative lead pin in the
pump connector.
Never keep the pump connected to the power supply unit for more
than 3 seconds in a row.
H006418
H06268
S.6