Husqvarna TC 449 2011 I.E. Workshop Manual page 108

16
20
21
22
25
Workshop Manual Ed. 03-2012
GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
-
H02499
-
H02500
-
-
23
H02501
-
24
H02502
Turn coil (16) by 90° so that connector is pointing to bike rear end, then
remove it.
Disconnect Blow-by hose (20).
Loosen screw (21) and screw (22) (with a 14 mm wrench), and remove right
connecting rod (23).
Disconnect all engine wiring harnesses.
Loosen screw (24) and remove neutral sensor wiring harness (25).
E.40