Tail Light Replacement (Te - Smr) - Husqvarna TC 449 2011 I.E. Workshop Manual

MY11
3
2
Workshop Manual Ed. 03-2012
ELECTRICAL SYSTEM
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Tail light replacement (TE - SMR)

1
Remove the tail light as follows:
- Loosen the two screws (1) under the rear mudguard.
H11206
MY12
1
H11207
MY11
3
- Extract the tail light (2) and disconnect the connector (3).
Once the bulb has been replaced, reverse the above procedure to reassem-
ble.
2
H11208
MY12
H11209
Make sure you do not overtighten the screws and refit the bu-
shings correctly, if present.
M.48