Rear Tank Removal; Solenoid Starter Removal - Husqvarna TC 449 2011 I.E. Workshop Manual

1
2
2
3
Workshop Manual Ed. 03-2012
GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Rear tank removal

- Remove the rear chassis, as described in the relevant paragraph.
- Loosen the two screws (1) securing tank (2) to rear chassis (3), and remove
tank.
3
H02457

Solenoid starter removal

- Remove the saddle as described in the relevant paragraph.
- Disconnect the negative and positive cables of the battery.
1
- Disconnect the starter motor positive cable (1) from the solenoid starter
(2),
- Disconnect the connector (3) and remove the solenoid starter (2) from its
mount.
H02458
On reassembly, check the correct positioning of the bushings.
E.26