Replacement Of The Oil Pressure Valve And Unidirectional Valve - Husqvarna TR 650 TERRA 2013 Workshop Manual

2
6
4
Workshop Manual Ed.09-2012
GENERAL ENGINE PROCEDURES
TR 650 TERRA 2013 - TR 650 STRADA 2013
REPLACEMENT OF THE OIL PRESSURE VALVE AND UNIDIRECTIONAL
VALVE
- Position a container under the oil filter cover in order to collect the oil in the
-
- Remove the oil filter (3).
- Clean the filter box of residual oil.
-
-
- Refit the oil filter (3).
-
1
-
H11564
2
3
H11565
5
H11566
filter seat and oil filter.
Loosen the two screws (1) and remove the oil pump cover (2).
Loosen the pressure control valve (4) and the unidirectional valve (5).
Replace the valves and screw down all the way with Loctite 243.
Check the condition of the OR gasket (6), replace if ruined, lubricate with
motor oil.
Fit the cover (2) tightening the screws (1) to torque.
F1.18