Digital Dashboard, Warning Lights (Te - Smr) - Husqvarna TC 449 2011 I.E. Workshop Manual

Workshop Manual Ed. 03-2012
ELECTRICAL SYSTEM
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Digital dashboard, warning lights (TE - SMR)

the motorcycle is fitted with a digital dashboard on which 3 warning lights are
also available: high beam, turning indicators and fuel reserve.
1- BLUE warning light "High beam"
2- GREEN warning light "Turning indicators"
3- ORANGE warning light "Fuel reserve"
TE - SMR MY11 / SMR MY12
When the ignition key is turned to the IGNITION position, the dashboard display
lights up (amber colour).
NOTE:
H11263 - The check software version is displayed for the first 2 seconds; after the check
routine, the dashboard shows the last planned function.
TE MY12
The dashboard is activated only after the engine has been started.
NOTE:
- Every time the engine is started, the dashboard shows the SW version for the
first 2 seconds; after the check routine, the dashboard shows the last planned
function.
- A few seconds after the engine has been turned off, the dashboard is deac-
tivated.
To select the instrument functions and to set to zero the functions, use the
SCROLL knob (A)
The functions, which can be selected in this sequence, are as follows:
1- SPEED / ODO
2- SPEED / CLOCK
3- SPEED / TRIP
4- SPEED / LAP TIMER
5- SPEED
1- SPEED / ODO
IMPORTANT: In the event of a FUEL INJECTION SYSTEM MALFUNCTION,
H11264
the word FAIL appears on the right side of the dashboard display: When this is
the case, contact your HUSQVARNA dealer.
1- SPEED (km/h or mph) / ODO
- SPEED: vehicle speed - maximum value: 299 Km/h or 299 mph;
- ODO: odometer - maximum value: 99999 Km.
TE - SMR MY11 / SMR MY12
To change unit from kilometres to miles or miles to kilometres, proceed as follows:
1) set to figure 1, turn the key to OFF and push SCROLL (A).
2) place the ignition key in the IGNITION position and hold down the SCROLL
button (A) until "Km/h" is displayed.
3) the display will now alternate between "Km/h" and "Mph Miles", push the
SCROLL button (A) again while the desired unit is displayed.
M.56