Troubleshooting; First Check Items - Kyocera ECOSYS M3040dn Service Manual

1-4-2 Troubleshooting

(1) First check items

If the paper is fed askew, jammed, curled, or leading-edge dog-eared, first perform to check the following
items.
Check items
Paper 1. Check the paper delivered is
dog-eared, skewed or
rumpled.
2. Check how paper is loaded in
the cassette (paper feeder).
Check that the paper has
been properly aligned with
width adjuster cursor and the
rear guide; it has been loaded
without skewing; or it is not
damaged. (Crumpled paper,
main unit jam)
3. Check how paper is loaded.
Check if the cutting edge of
the paper bundle inside is
cumpled or bent.
4. Check the paper is damp,
wavy, or curled.
5. Check if the paper loaded
was stored in a continuously
humid place.
6. Check if the paper conforms
to the requirements.
Check description Corrective measures
If a dog-ear has happened, check there are no objects
existing in the conveying paths and, if any, fix.
If the paper is fed askew or crumpled, perform the fol-
lowing No.2.
Adjust the cursors to the size of the paper.
If the cutting edge of the paper bundle is crumpled, fan
the paper before loading.
If the paper is folded, stretch before loading in the
cassette
1. Load the paper bundle in the cassette upside down.
2. Load the paper bundle after rotating it 180°and
reload.
3. Change the paper.
Instruct the user to store paper in a dry, less humid
place.
Isolate the cause of the problem by replacing the paper
with the recommended paper.
(see page 1-1-1)
1-4-9
2NM/2NX/2NY/2NZ/2P0/2P6