Paper Jam At Feeding From Cassette 2 (Paper Feerder) - Kyocera ECOSYS M3040dn Service Manual

(4) Paper jam at feeding from cassette 2 (paper feerder)

Electrical parts that could cause paper jam during paper travelling at the primary
feeding ( to regist roller)
Timing of detection
Corrective Action
PF paper feed sensor (PFFS)
PF paper feed clutch (PFPFCL)
PF paper feed motor (PFPFM)
Checking
procedure at the
Corrective action at the occurrence
occurrence of
J0502/J0512
1 Items for Initial Checks
2
PF Feed sensor 1 (PFFS1): Conduct
connectivity check, mounting location
check, operation check
3
PF paper feed clutch (PFPFCL1):
Operation check
4
PF paper feed motor : Operation check
5
PF main PWB : Replace
Checking
procedure at the
occurrence of Corrective action at the occurrence
J4002/J4012
J4102/J4112 *2
1 Items for Initial Checks
2
Ragistration sensor (RS): Conduct
connectivity check, mounting location
check, operation check
3
Control PWB : Replace
4
Drum PWB : Replace *2
Jam code
J0502, J0512, J4002, J4012, J4102 2*, J4112 *2
Related parts
PF main PWB (PF PWB)
Control PWB (CONPWB)
Drum PWB (DRPWB)
Connect right PWB (C-RPWB)
On/Off control signal output connector
(terminal), point of checking connection
See page 1-4-9
PF main PWB YC5-6
PF main PWB 2 YC4-1
PF main PWB YC4-3(RDY), 5(REM)
On/Off control signal output connector
(terminal), point of checking connection
See page 1-4-9
CONPWB YC19-12
DRPWB YC6-2 *2
1-4-16
2NM/2NX/2NY/2NZ/2P0/2P6