Setting Of The Fuser Pressure Release Lever (40 Ppm Model Only); Connecting The Power Code - Kyocera ECOSYS M3040dn Service Manual

Setting of the fuser pressure release lever (40 ppm model only)

1. Open the rear cover.
2. Push the release lever down for
changing the lever position to a normal
position from a shipment position.
3. Close the rear cover.

Connecting the power code

1. Open the rear cover.
2. Remove the inlet cover.
3. Connect the power cord to the main unit
and the wall outlet.
4. Refit the inlet cover.
5. Close the rear cover.
1
Power cord
Inlet cover
1-2-13
2NM/2NX/2NY/2NZ/2P0/2P6
Release lever
(Shipment position)
Release lever
(Normal position)
Rear cover
Figure 1-2-22
Figure 1-2-23
Wall outlet
2