U631/Comm Ctrl 2 - Kyocera ECOSYS M3040dn Service Manual

U631 Comm Ctrl 2
Description
Makes settings regarding fax transmission.
Purpose
Transmission and reception of ECM are set up.
The frequency of CED is set up.
1. Press the start key.
2. Select the item to be set.
Display
ECM TX
ECM RX
CED Freq.
Setting: ECM TX
To be set to OFF when reduction of transmission costs is of higher priority than image quality.
This should not be set to OFF when connecting to the IP (Internet Protocol) telephone line.
1. Select the setting.
Display
On
Off
* : Initial setting: ON
2. Press the start key. The setting is set.
Setting: ECM RX
To be set to OFF when reduction of transmission costs is of higher priority than image quality.
This should not be set to OFF when connecting to the IP (Internet Protocol) telephone line.
1. Select the setting.
Display
On
Off
* : Initial setting: ON
2. Press the start key. The setting is set.
Sets ECM transmission.
Sets ECM reception.
Sets the frequency of the CED signal.
ECM transmission is enabled.
ECM transmission is disabled.
ECM reception is enabled.
ECM reception is disabled.
1-3-76
2NM/2NX/2NY/2NZ/2P0/2P6
Description
Description
Description