Scan To E-Mail Error Codes - Kyocera ECOSYS M3040dn Service Manual

(3) Scan to E-mail error codes

Code
1101 SMTP/POP3 server does not exist on
the network.
1102 Login to the SMTP/POP3 server has
failed.
1104 The domain the destined address
belongs is prohibited by scanning
restriction.
1105 SMTP protocol is not enabled.
1106 Sender's address is not specified.
2101 Connection to the SMTP/POP3 server
has failed.
2102 Connection to the SMTP/POP3 server
has failed.
(Connection timeout)
2103 The server cannot establish communi-
cation.
2201 Connection to the SMTP/POP3 server
has failed.
2202 Connection to the SMTP/POP3 server
has failed.
(Timeout)
2204 The size of scanning exceeded its limit.
3101 SMTP/POP3 server responded with an
error.
3102 Error: Server Response.
Contents Check procedures/corrective measures
1. Check the SMTP/POP3 server name.
2. Confirm device's network parameters.
3. Confirm the network parameters the device is con-
nected.
1. Confirm user name and password.
2. Check the SMTP/POP3 server.
1. Confirm device's SMTP parameters.
1. Confirm device's SMTP protocols.
1. Confirm device's SMTP protocols.
1. Check the SMTP/POP3 server name.
2. Confirm that the LAN cable is properly connected to
the device.
3. Check the SMTP/POP3 port number.
4. Confirm device's network parameters.
5. Confirm the network parameters the device is con-
nected.
6. Check the SMTP/POP3 server.
1. Check the SMTP/POP3 server name.
2. Check the SMTP/POP3 port number.
3. Confirm device's network parameters.
4. Confirm the network parameters the device is con-
nected.
5. Check the SMTP/POP3 server.
1. Check the SMTP/POP3 server name.
2. Check the SMTP/POP3 port number.
3. Confirm device's network parameters.
4. Confirm the network parameters the device is con-
nected.
5. Check the SMTP/POP3 server.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
1. Confirm device's network parameters.
1.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
3. Check the SMTP/POP3 server.
1. Check the SMTP/POP3 server.
2. Wait a minute and trye again.
1-4-108
2NM/2NX/2NY/2NZ/2P0/2P6-1