Original Conveying Section And Switchback/Eject Section - Kyocera ECOSYS M3040dn Service Manual

(2) Original conveying section and switchback/eject section

The original conveying section consists of the parts shown in figure. A conveyed original is scanned by the
optical section (CCD) of main unit when it passes through the slit glass of main unit.
The original switchback/eject sections consists of the parts shown in figure. An original of which scanning is
complete is ejected to the original eject table by the eject roller.
An original is conveyed temporarily to the original eject table and conveyed again to the original conveying
section by the switchback roller.
[Component formation]
1. Actuator
(DP registration sensor)
2. DP registration roller
3. DP regisutration pulley
4. Reading guide
5. Slit glass
6. DP conveying roller
7. DP conveying pulley
8. Switchback guide
9. Switchback roller
10. Switchback pulley
11. DP eject roller
12. DP eject pulley
13. Switchback guide
14. Eject table
1
3 2 5
Figure 1-5-129
2
3
1
4
6
Figure 1-5-130
1-5-77
2NM/2NX/2NY/2NZ/2P0/2P6
13 8 10
4 6 7
10
11
9
12
9 11 14
12