Replace All Originals If Restarting Job; Reinstall Missing Or Unresponsive Cartridge [31.Xy]; Reinstall Missing Or Unresponsive Imaging Unit [31.Xy]; Replace Unsupported Cartridge [32.Xy] - Lexmark MX610 Service Manual

Mfp
Hide thumbs Also See for MX610:
Table of Contents

Advertisement

Replace all originals if restarting job.

Try one or more of the following:
Touch Cancel job to clear the message and cancel the scan job.
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
Touch Finish job without further scanning to end the last successful scan job.
Touch Restart job to restart the scan job with the same settings from the previous scan job.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:
Check if the toner cartridge is missing. If missing, install the toner cartridge.
For information on installing the cartridge, see the "Replacing supplies" section of the User's Guide.
If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner
cartridge.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:
Check if the imaging unit is missing. If missing, install the imaging unit.
For information on installing the imaging unit, see the "Replacing supplies" section of the User's Guide.
If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the imaging unit is defective. Replace the
imaging unit.

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the "Replacing supplies" section of the User's
Guide.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the "Replacing supplies" section of the User's
Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.
Diagnostic information
99
7016

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7016-6307016-6707016-675

Table of Contents