Lexmark MX610 Service Manual page 64

Error code Description
241.14 The media is late reaching the sensor (input) within
the specified time from tray 1.
241.15 Media tray 1, tray pulled jam.
241.16 The engine timed out waiting for the tray 1 to report
'ready' before the 1st pick attempt.
241.17 Page was not properly picked from tray 1. Have not
exhausted all pick retry attempts as there are sheets
committed to the paper path from below.
241.18 Failed to feed from tray 1. Exhausted all pick retries.
Paper present sensing indicates media is in the tray.
241.20 Took too long to ramp up media feeder motor in tray
1.
241.21 Media feeder motor stall in tray 1.
241.22 Media feeder motor pick motor underspeed in tray 1.
241.24 Media feeder motor stalled on the last pick attempt
in tray 1.
241.29 Tray 1 lift plate failed to make the index sensor while
elevating.
241.32 Media tray not ready.
241.33 The media tray was pulled during the media pick
process.
241.41 Media feeder motor stall in tray 1.
241.42 Media feeder motor pick motor under‑speed in tray
1.
241.43 Media feeder motor stalled on the last pick attempt
in tray 1.
241.44 Motor 2 (Separator/Passthru) motor stalled.
241.45 Motor 2 (Separator/Passthru) motor PWM overflow
error (underspeed). Motor underspeed (max PWM
and motor underspeed, typical accordion jam).
241.46 Motor 2 (Separator/Passthru) motor ramp (end ramp
- did not reach speed, typical pack feed paper jam).
241.47 Motor 3 motor stalled.
241.48 Motor 3 motor PWM overflow error (underspeed).
Motor underspeed (max PWM and motor
underspeed, typical accordion jam).
241.49 Motor 3 motor ramp (end ramp - did not reach speed,
typical pack feed paper jam).
Action
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Diagnostic information
64
7016
69.
69.
69.
69.
69.