Konica Minolta Bizhub C353 User Manual page 25

1
No. Part name
9 Image controller IC-409
10 Desk DK-504
11 Paper feed cabinet PC-104
12 Paper feed cabinet PC-204
13 Paper feed cabinet PC-405
14 Finisher FS-519
15 Output tray OT-602
16 Mailbin kit MT-502
17 Saddle stitcher SD-505
18 Punch kit PK-515
19 Finisher FS-609
20 Punch kit PK-501
21 Job separator JS-505
22 Local interface kit EK-603
23 Fax kit FK-502
24 Scan accelerator kit SA-
*1
501
25 Fax multi line ML-501
26 Video interface kit VI-504
27 Stamp unit SP-501
28 Security kit SC-503
29 Assist handle AH-101
30 i-Option LK-101
31 i-Option LK-102
1-4
Description
The external image controller connecting to bizhub C353/C253.
Allows this machine to be used as a color printer configured into a computer
network. For details, refer to the corresponding User's Guide.
!
Detail
To install the image controller, any of the desk, LCT, single paper feed cab-
inet, or double paper feed cabinet must be installed to the machine.
Allows this machine to be set up on the floor.
Referred to as the "desk" throughout the manual.
The top tray can be loaded with up to 500 sheets of paper, and the bottom tray
can be used as storage.
Referred to as the "single paper feed cabinet" throughout the manual.
Both the top and bottom trays can each be loaded with up to 500 sheets of
paper.
Referred to as the "double paper feed cabinet" throughout the manual.
Can be loaded with up to 2,500 sheets of paper.
Referred to as the "LCT" throughout the manual.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by pages), Staple settings ("Corner" and "2 posi-
tion") Center Staple setting, and Half-Fold setting are available.
Installed onto finisher FS-519 to divide printed pages.
Referred to as the "output tray" throughout the manual.
Installed onto finisher FS-519 to divide printed pages (only with computer
printing) and feed them into the appropriate tray assigned to a specific individ-
ual or group. Collects printed pages.
Referred to as the "mailbin kit" throughout the manual.
Installed onto finisher FS-519 so that copies can be bound or folded at the
center.
Referred to as the "saddle stitcher" throughout the manual.
Installed onto finisher FS-519 to allow hole punching to be used.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by pages), Staple settings ("Corner" and "2 posi-
tion"), and Center Staple & Fold setting are available.
!
Detail
To install the finisher, any of the desk, LCT, single paper feed cabinet, or
double paper feed cabinet must be installed to the machine.
Installed onto finisher FS-609 to allow hole punching to be used.
Installed onto the output tray to divide printed pages.
Referred to as the "separator" throughout the manual.
*1
Used for connecting the authentication unit (biometric type), the authentication
unit (IC card type) and external memory (USB memory).
*1
Allows this machine to be used as a fax machine.
Creates images at high speed when sending scans.
Installed to increase the telephone lines available for faxing.
*2
Necessary for connecting the image controller to bizhub C353/C253.
*2
Applies a stamp to originals that have been scanned.
For details, refer to the User's Guide [Network scan/Fax/Network Fax Opera-
tions].
*1
Installed to encode the entire data saved on the hard disk. Even if an unexpect-
ed accident such as hard disk theft occurs, encoded data in the hard disk is
protected against disclosure.
*3
Used when closing the original cover or ADF.
*3
Allows the Web Browser and Image Panel functions to be used from the con-
trol panel.
For details, refer to the User's Guide [Advanced Function Operations].
*3
Allows PDF encryption, digital signatures and properties to be specified when
transmitting PDF documents with Scan mode or User Box mode operations.
For details, refer to the User's Guide [Advanced Function Operations].
Before making copies
C353/C253/C203