Konica Minolta Bizhub C353 User Manual page 148

Basic copy operations
– To bind copies at the center, touch [Yes] below "Center Staple" and [Yes] below "Half-Fold".
– If a cover sheet is added with the "Cover Sheet" function, the cover sheet (60 g/m
be stapled.
– When the "Center Staple" and "Half-Fold" setting is selected, the following factory default settings
are automatically selected.
1-Sided > 2-Sided
Booklet
Recommended zoom ratio (70.7%) when the "Booklet" function is selected
– When the "Center Staple" and "Half-Fold" setting is selected, the following Finishing settings are
not available.
Group
Offset
Staple
Punch
– To cancel the "Center Staple" and "Half-Fold" setting, touch [No].
4
Touch [OK], and then touch [OK] again.
When Finisher FS-609 is installed
Paper Weight
2
60 g/m to 90 g/m
Number of Bound Pages
2 sheets to 5 sheets
6 sheets to 10 sheets
11 sheets to 15 sheets*
* The number of sheets that can be bound together differs depending on the paper weight.
2
64 g/m
2
80 g/m
!
Detail
In order for copies to be bound at the center, all of the following conditions must be met.
The paper width must be between 210 mm and 297 mm.
The paper length must be between 279 mm and 432 mm.
C353/C253/C203
Paper Size
2
A3 w, B4 w, A4 w
paper: 15 sheets
paper: 10 sheets
Number of Bound Pages
2 sheets to 15 sheets
Maximum Number of Sets
20 sets
10 sets
10 sets
2
2 2
to 209 g/m ) can
*
2-75