Copy paper/originals
2
Select the button for the bypass tray.
3
Touch [Change Tray Settings].
4
Touch [Standard Size].
The Standard Size screen appears.
5
Touch [↓] twice, and then touch [A6Cardw].
–
Touch [↑] and [↓] until the button for the desired paper size is displayed.
–
If "A6Cardw" is selected, "Thick 3" is automatically selected. If paper other than postcards are
loaded, change the paper type setting. For details on the paper type settings, refer to "Specifying a
setting for special paper" on page 6-16.
6
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
The paper size for the bypass tray is set.
C353/C253/C203
6
6-9