Application functions
!
Detail
The specified paper can be inserted at a maximum of 30 locations within an original of up to 999 pages.
In double-sided originals, one double-sided page is considered to be two pages (one for the front and
one for the back).
1
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original" on page 2-7.
–
For an original that exceeds 100 pages, refer to "Scanning the original in separate batches
("Separate Scan" setting)" on page 2-9.
2
Load the paper to be used for the insertions sheets and the main body of the original into the desired
paper trays.
–
Use paper with the same size for the insertion sheets and for the main body of the original, and load
them in the same orientation.
–
To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
3
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
–
For details on using thick paper for the insertion sheets and on loading the paper, refer to "Paper
types and paper capacities" on page 6-4 and "Loading paper into the bypass tray" on page 1-47.
–
To cancel the setting and select the default, press the [Reset] key.
The Sheet/Cover/Chapter Insert screen appears.
4
Touch [Insert Sheet].
–
To cancel the "Insert Sheet" function, touch [No].
The Insert Sheet screen appears.
C353/C253/C203
7
7-29