Konica Minolta Bizhub C353 User Manual page 511

11
– For uneven printing of the print image, touch [+] to
increase the adjustment.
– Each time [+] or [–] is touched, the value is increased
or decreased by one increment.
8
Touch [OK].
9
Touch [Close].
Try performing the copy cycle again.
10
Check the printed image, and finish the adjustment if there are no flaws.
– If more adjustment is necessary, repeat steps 1 through 9.
– If the print image flaws are worse, adjust the setting in step 7 in the opposite direction.
11-48
Utility mode
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
C353/C253/C203