Konica Minolta Bizhub C353 User Manual page 52

Before making copies
2
Type in the password (up to 8 digits) for non-business hours.
– For details on setting the password for non-business hours, refer to "System Settings" on
page 11-23.
3
Touch [OK].
The message "It is now non-business hour. Set the Sleep Mode time." appears.
4
Using the keypad, again type in the length of time until the machine enters Sleep mode.
– Specify a length of time between 5 minutes and 9 hours and 59 minutes.
How can a single digit be entered?
?
% First, type in "0". If a minutes setting of less than 5 is entered, the setting changes to 5 minutes. In
addition, a minutes setting of 60 or more cannot be specified.
5
Touch [OK].
The message "Ready to copy." appears on the touch panel.
Note
If the message "It is now non-business hour. Set the Sleep Mode time." or "It is now non-business hour.
To use the device, enter password using the keyboard or keypad and then touch [OK]." appears after
the sub power switch is pressed, the Weekly Timer is set.
C353/C253/C203
1
1-31