Separating Copies By Sets ("Sort" Setting) - Konica Minolta Bizhub C353 User Manual

Basic copy operations
Available Finishing Settings
Sort
Group
Offset
Staple
Punch
Center Staple & Fold
Half-Fold
Select Output Tray
Sort
Group
Offset
Staple
Punch
Center Staple & Fold
Half-Fold
Select Output Tray
*1
"FS-519" indicates finisher FS-519.
*2
"FS-609" indicates finisher FS-609.
2.12.1

Separating copies by sets ("Sort" setting)

0 As the factory default, "Group" is selected.
0 If finisher FS-519 is installed, the output tray can be selected. For details, refer to "Selecting the output
tray" on page 2-65.
0 If offset sorting is selected while no finisher or separator is installed, printed copies will be fed out and
sorted in an alternating w and v pattern if the following conditions are met.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one paper tray and with the v
orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
If offset sorting is selected while a finisher or a separator is installed, printed copies are fed out and
stacked on top of each other with each set shifted to separate it.
C353/C253/C203
*1
Standard FS-519
o o
o o
o o
× o
× ×
× ×
× ×
× o
*2 *2
FS-609 FS-609
+
Punch kit
o o
o o
o o
o o
× o
o o
× ×
o o
*1 *1
FS-519 FS-519
+ +
Punch kit Punch kit
+
Saddle
stitcher
o o
o o
o o
o o
o o
× o
× o
o o
Separator
o
o
o
×
×
×
×
o
2
*1
FS-519
+
Punch kit
+
Mailbin
o
o
o
o
o
×
×
o
2-63