Konica Minolta Bizhub C353 User Manual page 292

Copy paper/originals
2
Touch the button for tray 1.
– To specify a setting for special paper for tray 2/3/4 or the bypass tray, touch the button for the
corresponding paper tray.
– If a setting for special paper is selected for a paper tray, that tray is not selected automatically with
the "Auto" Paper setting. However, if the paper cannot be used for double-sided printing and the
"Single Side Only" setting is selected for the paper tray, that tray is given priority.
– The auto tray switch feature applies only to paper trays specified with the same paper type setting.
3
Touch [Change Tray Settings].
4
Select the appropriate setting for the type of special paper that is loaded.
– Touch the button for the desired paper type.
? What types of paper can be loaded in the paper tray?
% There are limits on the types of paper that can be loaded in a paper tray. For details on the type of
paper that can loaded, refer to "Specifications" on page 5-3.
% If postcards were loaded, select "Thick 3".
5
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
Reminder
If special paper is loaded into the paper tray, be sure to select the corresponding paper type, otherwise
a paper misfeed may occur.
C353/C253/C203
6
6-17