Client List Screen - ZyXEL Communications NBG-418N v2 User Manual

Figure 68 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Table 40 Network > DHCP Server > Advanced
LABEL
Static DHCP Table
IP Address
MAC Address
Add
Update
Delete
Reset
DHCP Static IP Table
Select
IP Address
MAC Address
Apply
Reset

9.6 Client List Screen

The DHCP table shows current DHCP client information (including IP Address, Host Name and
MAC Address) of network clients using the NBG-418N v2's DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Network > DHCP Server > Client List.
Note: You can also view a read-only client list by clicking the DHCP Table (Details...)
hyperlink in the Status screen.
The following screen displays.
Chapter 9 DHCP Server
DESCRIPTION
Type the LAN IP address of a computer on your LAN.
Type the MAC address (with colons) of a computer on your LAN.
Click Add button to add a new static DHCP entry.
Click Update button to see the updated DHCP Static IP table.
Click Delete button to delete a static DHCP entry.
Click Reset to clear the IP Address and MAC address box fields.
Click the Select radio button to select a static DHCP entry.
This field displays the LAN IP address of a computer on your LAN.
This field displays the MAC address of a computer on your LAN.
Click Apply to save your changes back to the NBG-418N v2.
Click Reset to begin configuring this screen afresh.
NBG-418N v2 User's Guide
98