ZyXEL Communications NBG-418N v2 User Manual page 57

Then, Click Add in the QoS Rules section and several fields appears. Enter 192.168.1.10 in the
3
Source IP field, 192.168.1.10/32 will appear in the field, the 32-bits network is IPv4 addresses
block that is assigned by your ISP. Next, enter 150000 for Up Ceiling and 600000 for Down
Ceiling and click Add. Note that the Up/Down Ceiling numbers should not exceed the Total
Bandwidth. You have successfully set a specific minimum and maximum bandwidth for this
particular IP address.
If you wish to delete a QoS Rules entry, click the Delete check box of the rule and click Delete
4
button. To clear the Source IP, Up/Down Ceiling box fields, click the Reset button.
Chapter 5 Tutorials
NBG-418N v2 User's Guide
57