ZyXEL Communications NBG-418N v2 User Manual page 83

Figure 58 Network > WAN > IPv6 (Static IPv6)
The following table describes the labels in this screen.
Table 32 Network > WAN > IPv6 (Static IPv6)
LABEL DESCRIPTION
IPv6 Connection Select Static IPv6 when your ISP provides you a set IPv6 address that does not
Type change. You must also enter the IPv6 address, Subnet Prefix Length, Default Gateway,
Primary and Secondary DNS Server provided by your ISP.
Wan IPv6 Address Settings
IPv6 Address Enter the IPv6 IP address on the WAN side in this field.
Subnet Prefix The prefix is the part of the address that indicates the bits that have fixed values or are
Length the bits of the network identifier. Prefix is written in address/prefix-length notation. For
example (21DA:D3:0:2F3B::/64)The default subnet prefix is 64. A route prefix is
48prefix.Enter the Subnet Prefix Length address on the WAN side in this field.
Default Gateway Enter the Default Gateway address on the WAN side in this field.
IPv6 DNS Settings
Primary DNS Enter the primary DNS server address for the IPv6 in this field.
Address
Secondary DNS Enter the secondary DNS server address for the IPv6 in this field.
Address
LAN IPv6 Address Settings
LAN IPv6 Address Enter the IPv6 IP address for the LAN port in this field.
LAN IPv6 Link-Local Enter the IPv6 Link-local address in the LAN side. This is used by routers when
Address communicating with neighboring devices on the same link. It allows IPv6-capable
devices to communicate with each other in the LAN side.i
Chapter 7 WAN
NBG-418N v2 User's Guide
83