ZyXEL Communications NBG-418N v2 User Manual page 33

Table 8 Web Configurator Status Screen (Router Mode) (continued)
LABEL
Link-Local Address
LAN Address
System Status
Operation Mode
System Up Time
Current Date/Time
System Setting
- Firewall
- UPnP
Summary
DHCP Table
Packet Statistics
WLAN Station Status
4.2.1.1 Summary: DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the NBG-418N v2's LAN as
a DHCP server or disable it. When configured as a server, the NBG-418N v2 provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only information here
relates to your DHCP status. The DHCP table shows current DHCP client information (including IP
Address, Host Name and MAC Address) of all network clients using the NBG-418N v2's DHCP
server.
Figure 21 Summary: DHCP Table
Chapter 4 Modes
DESCRIPTION
This field displays the link-local IP address of the NBG-418N v2 LAN port. A
link-local address is similar to a "private IP address" in IPv4. You can have the
same link-local address on multiple interfaces on a device.
This field displays the IPv6 LAN's IP address.
This field shows the device operation mode: Router, Access Point, or
Universal Repeater.
This is the total time the NBG-418N v2 has been on.
This field displays your NBG-418N v2's present date and time.
This shows whether the firewall is active or not.
This shows whether UPnP is active or not.
Use this screen to view current DHCP client information. Click "Details" to see
the screen.
Use this screen to view port status and packet specific statistics. Click
"Details" to see the screen.
Use this screen to view the wireless stations that are currently associated to
the NBG-418N v2.
NBG-418N v2 User's Guide
33